Early warnings for power plants and pipelines that depend on rivers.

Floods and heat waves can shut down energy sites. Flowcast warns operators weeks before.

See what happened in 2010 and 2011

Story 1 · Power plant · Summer 2010

The Tennessee River got too warm, so a nuclear plant had to cut its power in half.

Browns Ferry Nuclear Plant in Alabama cools itself with river water. Its permit doesn't allow it to send water back hotter than 90°F. In summer 2010 the river itself got that warm, so the plant had to run at about half power for weeks, during the hottest part of the year.

Browns Ferry daily power level, average of 3 reactors (% of full power)Jul 1 – Aug 31, 2010

Not every drop is heat-related; plants also reduce power for repairs. TVA reported cutting power on at least 39 days from July 8 because of the hot river.

What Flowcast does

Forecasts when a river will reach a plant's temperature limit, so the utility can arrange backup power ahead of time instead of scrambling.

Sources: NRC Power Reactor Status Reports, 2010 · Chattanooga Times Free Press · Climate Central

Story 2 · Oil pipeline · Summer 2011

A flood washed away the riverbed above an oil pipeline. The pipe broke and spilled into the Yellowstone River.

Pipelines are buried under the riverbeds they cross. In 2011 the Yellowstone River in Montana flooded for weeks. Fast water dug away the riverbed, exposed ExxonMobil's Silvertip pipeline, and on July 1 it broke, releasing about 1,500 barrels of crude oil.

Yellowstone River at Billings, MT: daily water flow (cubic feet per second)May 1 – Aug 15, 2011

Demo rule, not Flowcast's model: Watch when flow passes 30,000 ft³/s; Act after 7 days in a row above it.

The river was already in flood more than a month before the pipe broke. Local officials had raised concerns with regulators beforehand.

What Flowcast does

Ranks every pipeline river crossing by flood risk, so operators know which pipes to inspect or protect first.

Sources: USGS gauge 06214500 · PHMSA enforcement notice · PHMSA penalty announcement

Who needs Flowcast

Power plants and utilities

Plants cooled by river water lose power when rivers get too hot or too low.

Pipeline operators

Buried pipes under rivers can be uncovered and broken by floods.

Grid operators

When plants cut power without warning, the grid has to find backup fast, often at high prices.

It isn't one river

18,136

places where US oil and hazardous liquid pipelines cross rivers, lakes and other inland water.

48 in

of soil must cover a pipe under a large river when it's built. No rule says it has to stay that deep.

8

pipelines failed in a single flood on the San Jacinto River in Texas in 1994.

36%

of US power plant capacity that runs on heat (coal, gas, nuclear) cools with water taken straight from rivers or lakes (2017).

Sources: PHMSA report to Congress · PHMSA flood advisory, 2011 · US Energy Information Administration

How it works

  1. 1

    Watch

    We read public river, weather and power plant data every day.

  2. 2

    Predict

    Our models forecast heat and flood risk for each site, weeks ahead.

  3. 3

    Warn

    Operators get a clear alert: which site, when, and what to do.

FlowcastIllustrative layout · not real forecast data
  • Power plantWatch
  • Pipeline crossingAct
  • Other sitesNormal

Rivers are changing. Energy sites need to see it coming.

Contact the team

Built on public data from USGS, NOAA, EIA, NRC, EPA and PHMSA.